Category: Uncategorized

300zx engine rebuilds and reconditioned engines »

If you are looking for an engine rebuild or reconditioned engine look no further than jimmer at powerzed he has a great site, service and is a real master on these cars. He can take them apart and put them back together again with his eyes closed. Everything from changing the head gaskets to a full [...]

Rays 7 Spoke Titanium Gram Light Wheels AWSOME!!!! »

These are the best looking wheels that you can put on a 300zx in my opinion, they were special order from Japan and took nearly 4 months to arrive. If you want to see them on the car have a look at the FINNISHED CAR!!! page on the top navigation.  I think that if you [...]

Relocating power steering resovoir »

This is a nice fun job to do on the 300zx after you have deleted all the stuff that goes next to the brake servo. When you have done this there is enough room to put the resovoir on the bulkhead next to the wing. There is a bracket bolted on there with two 10mm [...]

Fitting the new EFI harness »

This is a dog of a job… I read a few places that a few people have done this with the engine in. Personally i would say this is impossible. They are either telling porkies or know something we dont, its a very difficult job to do and you will need to be very patient not [...]

My top ten 300 zx deletes and weight saving tips »

Ok well I have really struggled getting my head around all the bits on this car that you can actually throw away with a bit of effort. When we took the engine out we took lots of pictures and almost all the pipework has changed putting it back together. I will touch on a few [...]

Relocating the fuse box to inner wheel arch »

This job has taken James a few days to do but it will be well worth it.  Its a very slow job to do and critical to label and document the whole process. The fuse box wires were all cut then extended through a hole into the bulkhead then extended and re connected. Then some [...]

Engine build progress so far »

Since the engine block was delivered we have spent a fair bit of time working on it. I don’t think that you can appreciate how much work goes into building one of these up even if you have had a block built by someone else. It is taking all the parts off the old engine [...]

Tein Monoflex and Stoptech big brake fitted on the front »

Today we started on the suspension and braking system replacement on the car. The old Brembos came off without to much trouble and it was pretty simple to remove the existing front shocks at the same time. After removal of the shocks I adjusted the new Tein ones to about the same height as a [...]

Car undersealing »

The next step of the job was to underseal the whole car, we are fortunate that it is a very solid car underneath being a Jap import. We really wanted to keep it that way as well. We prepaired all the areas to be treated, primarily this is inside of the doors, the sills, rear [...]

All my parts have arrived look at this little lot »

I ordered most of this stuff back in September but it was all well worth the wait. I can now start putting my engine together now!.

/*
*/