Car undersealing

The next step of the job was to underseal the whole car, we are fortunate that it is a very solid car underneath being a Jap import. We really wanted to keep it that way as well. We prepaired all the areas to be treated, primarily this is inside of the doors, the sills, rear wheel arches and the whole underneath of the car. The stuff goes everywhere when you spray it on, and it is a real sod to get off as well. We did the front end first then the rear of the car. Finally we did inside of the rear wheel arches and inside of both the doors. A little tip here is to make sure you put masking tape over the holes in the bottom of the doors, this means it will stop it coming out onto your paintwork.

2010-02-06_16.19.02

2010-02-06_16.19.29

Post a Comment

Powered by WP Hashcash